10.0.0.1 – 10.0.0.0.1

10.0.0.110.0.0.1 is the local IP address used to configure the router and network. Some Infinity, Cisco, and ASUS routers manufactured by D-Link or Comcast have 10.0.0.1 as the default address.

10.0.0.1 is the local IP address used to configure the router and network. Some Infinity, Cisco, and ASUS routers manufactured by D-Link or Comcast have 10.0.0.1 as the default address.

What is 10.0.0.1

10.0.0.1 is a private IP address, so it can only be accessed on the local network behind a wireless router, not over the Internet. So, if you have no idea how the default gateways work, you should be calm when we say that ONLY those that are connected to your network have access to them.

Unless you share your WiFi password, your neighbors or someone else may NOT connect to your device and configure your network settings. Only you can configure your router’s settings with the default password.

To quickly access the login page of your router, simply click on the login buttons below. These buttons will take you directly to the 10.0.0.1 admin login page.

10.0.0.1 Admin

192.168.1.1 ผู้ดูแลระบบ

How to connect 10.0.0.1

Connecting to 10.0.0.1 is pretty easy. It’s like connecting to your favorite website. Of course, this will only work if your router supports it or is your router’s default gateway.

If you are unsure of your IP address, we have a short guide for you. If you want to know the IP address of your router, check these methods first:

วิธีค้นหาที่อยู่ IP ของเราเตอร์บนคอมพิวเตอร์ Mac หรือ Linux

วิธีค้นหาที่อยู่ IP บนคอมพิวเตอร์ Windows 10

We are almost certain that by now you already have a basic idea of ​​10.0.0.1. So let’s learn more about this application and how to use the IP address 10.0.0.1.

1. First of all, you need to open your favorite internet browser.
2. Go to or type in the address bar of the web browser 10.0.0.1.
3. Once the page loads, the admin login will appear. On this page, you will be asked to enter your username and password. By default, this is “admin” for the username and “admin” or “password” for the password.
4. After entering the username and password, just press the ENTER key and you are inside. You can now change everything on the router setup page.

10.0.0.1 Login Problem

If 10.0.0.1 is your default gateway and you still can’t connect to it for some attempts, then there’s obviously a problem. When you see “Internet failed to connect to server”, I must say that this is a common problem.

1. It cannot be said whether this is a big deal or a simple error in the router itself. It can mean many things. But start by shutting down your antivirus program and check again.

2. Does it work? If not, check the LAN cable to see if you are connected to a cable. There may be a damaged part somewhere in the cable duct. If so, you will need to purchase a new LAN cable.

3. The first thing you need to do is reset the router by default. To do this, find the reset button on the back of the router. If you find the reset button, just press it for 10 seconds until the router restarts automatically. You must release the button after it restarts.

Restarting will reset the router to factory settings.

Thai